Energy Storage System
LiFePO4 battery system documented by EGEOINC. Compatible with photovoltaic integration: panels, complementary equipment and included services are specified in each project's proposal.
About the commercial designation: this equipment is presented under a generic title ("Energy Storage System") because its original datasheet does not include a specific manufacturer model code. The rated output and battery capacity are confirmed and detailed below.
| Rated output | 30 kVA |
|---|---|
| Rated battery capacity | 61.44 kWh |
To receive this system's full datasheet or proceed with a quote, use the inquiry button.
Inquire about this equipmentData source: the parameters in the following tables come from the PDF "Introducción a los sistemas de almacenamiento de energía solar de EGEOINC" ("Introduction to EGEOINC solar energy storage systems"), page 2, and are presented exactly as documented in that source. Verify these values with the manufacturer before using them for detailed engineering.
DC / battery parameters
| Cell type | LiFePO4 |
|---|---|
| Cell | 3.2 V, 150 Ah |
| Module | 51.2 V, 150 Ah (1P16S) |
| System configuration | 8 modules, 1P128S |
| System | 409.6 V, 150 Ah |
| Rated battery capacity | 61.44 kWh |
AC parameters — grid-connected
| Rated power | 30 kVA |
|---|---|
| Rated current | 43.5 A |
| Rated grid voltage | 400 V / 230 V |
| Voltage range | -20% ~ +15% |
| Grid frequency range | 50 Hz (47–52 Hz) / 60 Hz (57–62 Hz) |
| Current harmonic distortion | <5% (load >30%) |
AC parameters — off-grid mode
| Rated output power | 30 kVA |
|---|---|
| Maximum output power | 33 kVA |
| Rated current | 43.5 A |
| Maximum current | 48 A |
| Rated voltage | 400 V / 230 V |
| Output voltage harmonic distortion | <3% (resistive load) |
| Frequency range | 50 Hz / 60 Hz |
| Overload capability | 48 A < load ≤ 54 A: 100 s · 54 A < load ≤ 65 A: 100 ms |
PV-side parameters
| Maximum supported power | 2 channels × 19.2 kW |
|---|---|
| Maximum PV voltage | 850 V |
| PV start-up voltage | 250 V |
| MPPT voltage range | 200 V – 830 V |
| Maximum PV current | 32 A + 32 A |
| Solar panels | Compatible with photovoltaic integration. Panels, complementary equipment and included services are specified in each project's proposal. |
General system parameters
| Operating temperature range | -20°C to 55°C |
|---|---|
| Relative humidity | 5% – 95% |
| Cooling | Air conditioning |
| Ingress protection | IP54 |
| Fire protection | Aerosol |
| Altitude | 2000 m (90%/80% derating at 3000/4000 m) |
| Dimensions | 1700 × 1270 × 1045 mm |
| Weight | 1400 kg |
The 30 kVA nominal output and 61.44 kWh battery capacity are presented exactly as documented by the manufacturer, without deriving a kW figure without a confirmed power factor. Rated battery capacity is not equivalent to the usable energy available in real operation, which depends on factors such as depth of discharge, temperature and usage conditions. The 50 Hz and 60 Hz grid frequencies are presented exactly as documented by the manufacturer for this system.
Included components
- LiFePO4 battery system with energy management (EMS), as documented by the manufacturer.
- Digital system visualization, as documented.
- Grid-connected and off-grid operation.
- Two-channel PV connection support (MPPT 200–830 V).
Compatible with photovoltaic integration. Panels, complementary equipment and included services are specified in each project's proposal.